WIFI GUEST

[btmiki]

Hi,

I have two WIFI networks (FortiGate 500E + Forti AP):

1. For users  (Bridge mode)

2. For guest (Tunnel mode) 

NAME	TYPE	MEMBERS	IP
LAN Interface	Redundant Interface	PORT 5 PORT 6	10.1.2.1/255.255.255.0
VLAN - Base Interface	Redundant Interface	PORT 7 PORT 8
VLAN 10	VLAN		10.1.3.1/255.255.255.0
VLAN 20	VLAN		10.1.4.1/255.255.255.0
WiFi SSID
CORP	WiFi SSID		0.0.0.0/0.0.0.0
CORP-GUEST	WiFi SSID		172.10.10.1/255.255.255.0

and everything works but I changed the ports in Interfaces to SFP+:

NAME	TYPE	MEMBERS	IP
LAN Interface	Redundant Interface	PORT X1 (SFP)PORT 5	10.1.2.1/255.255.255.0
VLAN - Base Interface	Redundant Interface	PORT X2 (SFP)PORT 7
VLAN 10	VLAN		10.1.3.1/255.255.255.0
VLAN 20	VLAN		10.1.4.1/255.255.255.0

Lan and WIFI CORP it's ok but WIFI CORP-GUEST doesn't work, I don't have internet connection, can't ping gateway (172.10.10.1) only work DHCP. Do you have any idea why doesn't work ?

When I change ports back everything works. 

[Anthony_E]

Hello btmiki,

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Regards,

[Anthony_E]

Hello btmiki,

I have found this document:

https://docs.fortinet.com/document/fortigate/6.0.0/cookbook/694000/guest-wifi-accounts

Could you please have a look and tell me if it helps?

Regards,

[btmiki]

Hello Anthony,

Thanks for your reply but my Guest Network doesn't use accounts and a captive portal. I use WPA2 authentication.  

I have a problem only when I change port on interface.