Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Testing wireless network health with SAM
In the FortiWiFi and FortiAP Configuration guide (https://docs.fortinet.com/document/fortiap/7.0.2/fortiwifi-and-fortiap-configuration-guide/660096/te...) you can find information about a feature called SAM (Service Assurance Manager).
Any body using it and have it up and running? I have tried to set it up but can't seem to find any feedback. Can't find any status regarding if its active or not. Don't know where results are supposed to be shown. Have check the logs but no luck.
1 REPLY 1

Anonymous
Not applicable
Created on ‎01-17-2022 09:04 AM
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @KristianWinckler
Welcome to Fortinet community and Thank you for your post. Hopefully, you've been keeping safe and doing well!
We will have this looked and will reach you back as soon as possible.
You should receive an update from one of the team member soon. Thanks for your patience on this.
Regards
