Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Tutek
Contributor

Security Fabric Physical topology

Hello,

I have added to hub fortigate new two branch fortigates, is any way on hub device see this branches and it's connected local networks & devices in security fabric physical topology because now I don't see it?

4 REPLIES 4
Mohamed_Gaber
Contributor

Have you done this? I was waiting for a reply to know.

Mohamed Gaber
Cell : +201001615878
E-mail : mohamed.gaber@alkancit.com
Mohamed GaberCell : +201001615878E-mail : mohamed.gaber@alkancit.com
Tutek
Contributor

Hello,

I thing that security fabric has to be enabled on the root device to accomplish this, because I enable "Security Fabric Connection" options on both ends ipsec interfaces but this didn't help. Remote devices are not still visible on the root physical topology.

But on my main root Fortigate Security Fabric is disabled, I don't want to enable it because then I cannot decide what type of logging ipv4 poolicy have (all policies have type of logging "All").

Mohamed_Gaber
Contributor

I believe you need phase 2 of the VPN to allow this traffic.

Mohamed Gaber
Cell : +201001615878
E-mail : mohamed.gaber@alkancit.com
Mohamed GaberCell : +201001615878E-mail : mohamed.gaber@alkancit.com
Tutek

why?

my phase-2 have selectors all to all.

Labels
Top Kudoed Authors