SSL VPN problems with new FG100F and 6.2.5 - possible bug?
today we changed from a FG100D with 6.0.8 to a new FG100F and 6.2.5. Before we did not have any problems with all IPSec or SSL VPN connections. We have like 200 remote users becuase of of the Covid situation and last months like 50-60 IPSec connections via WAN1 and 50-70 SSL VPN connections via WAN2.
Today we changed also to SD WAN, also with the idea to put more traffic on WAN3 (mostly web traffic). Beisdes the SSL VPN connection is the SAME as on the FG100D model where everything went fine.
Today we got feedback from some users that their SSL VPN connection disconnected varios times after the change. I tried myself and my user and my ping didnt disconnect the whole time but at the same we connected via Teamviewer a 2-3 other users and they got disconnected like 2-3 times.
What can we do, is there a knoen bug about the SSL connection in 6.2.X?
we have 3 x Internet Access, you think we should enable it on all 3 interfaces? One interface is for IPSec VPN site to site and IPsec and this works fine.
We use the same access as before for the SSL VPN but now the big difference is the SD WAN because we use all accesses with SD WAN si I really dont know what we could check. Fortinet told me that there is no known bug for SSL VPN with this version.
It just worries me becuase right now SSL VPN is really importante in these Covid times.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.