Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
keithnet
New Contributor

SNMP on 40C with v5.0+ firmware

I' ve noticed with 5.0+ SNMP is no longer in the GUI on a 40C. There isn' t an option to enable it under admin settings either. So I went into the CLI to set it up. The problem is, I can' t get SNMP to connect using the same settings on my other Fortinet devices that have SNMP setup through the GUI. I have provided 2 screenshots. This first one is of my 80C that I configured SNMP through the GUI. This is what it shows in the CLI. This next shot is of the 40C in question that I configured in the CLI. This one will not connect. It says SNMP connection failed. Any ideas?
3 REPLIES 3
Dave_Hall
Honored Contributor

What do your...
config system snmp sysinfo config system snmp user
...sections look like?

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
rwpatterson
Valued Contributor III

IS SNMP enabled on the interface you' re trying to poll through?

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
keithnet
New Contributor

I completely forgot to enable it in sysinfo. I knew it was something silly. Thanks!
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors