Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
fb1907
New Contributor

Port forwarding

Hello,

 

There is a exchange server in local network and its owa application is reached everywhere.

 

So, there is a vip configuration and L4 port forwarding(for ex. wantolan: x.x.x.x-->exchangeserverip:443to443)

 

Firstly, it works good. But, it does not work after 30-40 minutes. When the vip configuration is changed, (for ex. L3 port forwarding: onetoone vip and service 443 in policy ) it work good again. But, it does not work again after 30-40 minutes.

 

It is bad loop. It can be arp problem.

1 REPLY 1
Jeff_FTNT
Staff
Staff

If the Wan interface is in dynamic mode (DHCP/PPPoE), make sure VIP have "set extip 0.0.0.0"  , thanks

Labels
Top Kudoed Authors