Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Aslam
New Contributor

Per-ip-shaper is not working

Hi Team!

 

i am using per-ip-shaper for my system but on my testing system per-ip-shaper is not working...

thinking that my configuration is not correct,can you tell me my configuration is correct or not...

 

i am attaching my fortigate backup

2 REPLIES 2
Aslam
New Contributor

config firewall policy edit 2 set name "aslam_testing" set uuid 1f3e037e-7f76-51e8-5b43-3942f7181aa5 set srcintf "internal" set dstintf "virtual-wan-link" set srcaddr "192.168.2.87" set dstaddr "all" set action accept set schedule "always" set service "ALL" set logtraffic all set auto-asic-offload disable set per-ip-shaper "Aslam_ip_shaper" set nat enable next

 

 

config firewall shaping-policy edit 3

set service "ALL" set dstintf "virtual-wan-link" set per-ip-shaper "Aslam_ip_shaper" set srcaddr "192.168.2.87" set dstaddr "all" next end

ede_pfau
Esteemed Contributor III

What exactly is "not working"? Can you post some measurements, please?

And post your traffic shaper config (config firewall shaper ipshaper).

 

Which FortiOS version?


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
Labels
Top Kudoed Authors