Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ZhellAlex
New Contributor

OS boot errors FG61E

Hello!
After updating the firmware, the following partition and OS2 errors were noticed in the console. Log below

FortiGate-61E (17:22-03.19.2018)
Ver:05000017
Serial number: FGT61ххххххх [Hughes]
CPU: 1000MHz
Total RAM: 2 GB
Initializing boot device...
Initializing MAC... nplite#0
Please wait for OS to boot, or press any key to display configuration menu......

Booting OS...
Partition [1] lba_start=2048 or lba_size=250065742 exceed the device size=8388607!
Partition table read from sata is illegal.
The sata might be formatted or improper poweroff happened when programming partion table recently.
Please reinstall OS2
Warning: Load OS2 firmware failed! You may fix it later in FOS.
Reading boot image... 2899598 bytes.
Initializing firewall...


How can I fix these 2 errors?
Thanks.

2 REPLIES 2
alif
Staff
Staff

Hello ZhellAlex,

 

Thank you for contacting Fortinet community.

 

Please take a backup of the existing log file and format the log disk via the below command.

execute formatlogdisk

 

Please refer to the following link for details.

Regards,
SFA
ZhellAlex
New Contributor

Hello!
I downloaded the log file according to your instructions.
log file of the device is available at the link https://drive.google.com/file/d/1LSaf7cu1KVELwnQKqJS4oULEP95pAogd/view?usp=sharing
Thanks.

 

Labels
Top Kudoed Authors