We using fortigte FG100E with fw v.6.0.2 build 0.6.1.3, we already configure failover with policy base routing. All working normal and monitor with link-monitor. The problem is when one link problem notification sent to email goes to junk mail. aftter i check the mail header there is no from mail .
Maybe an issue with the old 6.0.2? The config looks fine. My home 40F uses the same default "notification.fortinet.net" as SMTP server and no "reply-to" is configured. But it's 6.4.10 and the config has "set username" configured and the source email has this username in alert email. Does your 6.0.2 have "set username" command?
i check on my device there is no set username command
FG100 (email-server) # set type Use FortiGuard Message service or custom email server. reply-to Reply-To email address. server SMTP server IP address or hostname. port SMTP server port. source-ip SMTP server IPv4 source IP. source-ip6 SMTP server IPv6 source IP. authenticate Enable/disable authentication. validate-server Enable/disable validation of server certificate. security Connection security used by the email server. ssl-min-proto-version Minimum supported protocol version for SSL/TLS connections (default is to follow system global setting).
FG100E (Link monitor cha~ail) # show config system automation-action edit "Link monitor change_email" set action-type email set email-to "email@example.com" set email-subject "Link monitor change" next end
FG100E (Link monitor cha~ail) # set email-from firstname.lastname@example.org
command parse error before 'email-from' Command fail. Return code -61
FG100E (Link monitor cha~ail) # set Modify value. unset Set to default value. select Select multi-option values. unselect Unselect multi-option values. append Append values to multi-option. clear Clear multi-option values. get Get dynamic and system information. show Show configuration. next Configure next table entry. abort End and discard last config. end End and save last config.
FG100E (Link monitor cha~ail) # set action-type Action type. email-to Email addresses. email-subject Email subject. minimum-interval Limit execution to no more than once in this interval (in seconds)
still confuse how to add mail from, so when receive alert have mail from address from email@example.com not no sender receive that cause sent to junk folder.
Hi, appreciate for your help, already try link above but its happen with link status monitor, i have 2 WAN failover, when i got 1 link problem it will send notification alert for link change, it's working but goes to junk folder because i check there is no "from".
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.