I have just recently configured a 60B in interface mode and was successfully able to define each interface as a different subnet. internal1 is set to 192.168.0.99. Ive defined a internal dhcp server for this subnet which is properly handing out addresses, however Im unable to get outbound to the web. I also made sure i created a firewall policy that allows all traffic anytime from internal1 to pass through to wan1. What could i be missing?
Any advice would be greatly apprieciated.
Welcome to the forums Philip.
If your ISP is handing out IP addresses with DHCP, make sure you check the box that gets the default gateway from DHCP. If you have a static IP, you need to add the default gateway in the routing section under static routes.
As Abel said, can you ping out by IP? That would be my first step. If yes, then check your DNS settings. You' ll need to enable DNS forwarding on the internal interface if you are using the FGT to resolve names (Network > Options). You' ll need to add valid DNS servers there as well.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.