Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Nemat
New Contributor II

New frameware upgrade and fortiweb stucked.

Dears.

we have fortiweb 100E, it has an issue related to its database status and fortiweb dashboard always shows it is not available and we show issue db rebuild command at the same time the fortiweb itself works well, so we decided to do OS upgrade as follow:

from 6.3.5 to 6.3.9 then 6.3.21


The upgrade to 6.3.9 worked fine and the main issue seems to be solved, but when we had done the second upgrade the device stucked and it is not accessible through ssh or http and also doesn't respond to ping request.
How can we revert to 6.3.9 again without uploading it through ftp? or any recommendation will be appreciated.


Thanks.

the main issuethe main issue

2 REPLIES 2
Anthony_E
Community Manager
Community Manager

Hello Nemat,

 

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Regards,

Anthony-Fortinet Community Team.
gfleming
Staff
Staff

Did you happen to install 6.3.21 on the alternate partition? You can easily revert back this way. If not you may need to reinstall the previous firmware using TFTP.

 

either way if you do not have https or ssh access you will likely need local console access to fix this.

Cheers,
Graham
Labels
Top Kudoed Authors