I have setup a new vpn ipsec tunnel between two fortigates running 5.0.3.
SA proposal chosen, matched gateway PROD_VPN_P1
peer is Fortigate/FortiOS (v5 b208)
and then I get the following message in the debugs
ike 0:PROD_VPN_P1:2806: remote address a.b.c.d does not match configuration address a.b.y.z, drop
Not sure whats happening.
i am facing an issue in site to site ipsec vpn, tunnel is up , and i can access remote LAN. but remote lan can not access me, although the policies which i made for remote lan, in that policy i allowed access for remote lan, but still other party is unable to access my lan, can any body guide me what can be the issue.
I meet the error as well , there is a Cisco router 2911 build site to site VPN to fortigate 500D . It's not work and I enable debug on fortigate , I found the error "remote address 220.127.116.11 does not match configuration address 18.104.22.168, drop" . there is nothing VIP config about 22.214.171.124 . IP 126.96.36.199 is router's public IP.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.