Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
MustphaBassim
New Contributor III

HA-Issue

Hello Dears

 

I have two fortigate nodes and have an issue in HA as show in debug could anyone help me to tshoot it ?

 

FortiGate-601E-1 # get system ha status
HA Health Status: OK
Model: FortiGate-601E
Mode: HA A-P
Group: 0
Debug: 0
Cluster Uptime: 1 days 3:8:52
Cluster state change time: 2022-09-19 11:21:18
Primary selected using:
<2022/09/19 11:21:18> vcluster-1: FGXX is selected as the primary because its uptime is larger than peer member FG6H1ETB21908174.
<2022/09/19 11:21:18> vcluster-1: FGXX is selected as the primary because the value 0 of link-failure + pingsvr-failure is less than peer member FGXX.
<2022/09/19 10:28:47> vcluster-1: FGXX is selected as the primary because it's the only member in the cluster.
<2022/09/19 10:28:25> vcluster-1: FGXX is selected as the primary because the value 0 of link-failure + pingsvr-failure is less than peer member FGXX.
ses_pickup: disable
override: disable
Configuration Status:
FG6H1ETB21903183(updated 2 seconds ago): in-sync
FG6H1ETB21908174(updated 3 seconds ago): out-of-sync
System Usage stats:
FG6H1ETB21903183(updated 2 seconds ago):
sessions=709, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=29%
FG6H1ETB21908174(updated 3 seconds ago):
sessions=3, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=28%
HBDEV stats:
FGXX(updated 2 seconds ago):
ha: physical/1000auto, up, rx-bytes/packets/dropped/errors=27683685/57192/0/0, tx=23226902/62417/0/0
FGXX(updated 3 seconds ago):
ha: physical/1000auto, up, rx-bytes/packets/dropped/errors=5866259/16129/0/0, tx=7558516/14969/0/0
MONDEV stats:
FG6H1ETB21903183(updated 2 seconds ago):
ha: physical/1000auto, up, rx-bytes/packets/dropped/errors=27683685/57192/0/0, tx=23226902/62417/0/0
FGXX(updated 3 seconds ago):
ha: physical/1000auto, up, rx-bytes/packets/dropped/errors=5866259/16129/0/0, tx=7558516/14969/0/0
Primary : FortiGate-601E-1, FGXX, HA cluster index = 1
Secondary : FortiGate-601E-1, FGXX, HA cluster index = 0
number of vcluster: 1
vcluster 1: work 169.254.0.2
Primary: FGXX, HA operating index = 0
Secondary: FGXX, HA operating index = 1

 

Bests

3 REPLIES 3
aahmadzada
Staff
Staff
jintrah_FTNT

Hi,

 

If the cluster is still staying out of sync, the below article could help drill down and identify which object(s) are not getting synchronised.

 

Technical Tip: Troubleshooting a checksum mismatch... - Fortinet Community

 

Best regards,

Jin

parteeksharma

Hi MustphaBassim,

>> May I know since when the issue started?
>> Were there any recent upgrade performed ?
>> Is the issue intermittent or persistent ?
>> Does the issue occurs at specific time and then resolve automatically ?
>> Kindly share the output of below:

#config sys ha
#show full
#end

#diag sys ha history read

Regards,
Parteek

Labels
Top Kudoed Authors