- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fortimanager cannot authorize device "Failed to update device information."
Hello friends,
I try to add fortigate on Fortimanager, device can discover but cannot update device information as the picture below:
"Failed to update device information."
Can you help me?
My configure on FTG and FTM:
FTM:
(global)#show
config system global
set adom-status enable
set enc-algorithm low
set fgfm-ssl-protocol tlsv1.0
set timezone 07
set usg enable
FTG:
(central-management) # show config system central-management set type fortimanager set fmg "10.10.10.100" set fmg-source-ip 10.10.10.254 set enc-algorithm low end
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
When I try to sniffer on FTG
NGFW # diagnose sniffer packet port4 none 4 3 Using Original Sniffing Mode interfaces=[port4] filters=[none] 2.532156 port4 -- 10.10.10.254.541 -> 10.10.10.100.55536: psh 229249252 ack 3286956555 2.580668 port4 -- 10.10.10.100.55536 -> 10.10.10.254.541: ack 229249334 3.870773 port4 -- 10.10.10.100.55538 -> 10.10.10.254.541: syn 2919814881
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Friends,
I resolved it, the reason is the version of Fortimanager lower than FortiGate.
Thanks,
