- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fortigate80F FAP223E
Hello,
I am needing help because the Fortigate 80F v6.4.6 build6083 does not detect two FAP-223E.
I had already setup another installation time ago with the same Firewall ,firmware and access point without any kind of issue.
Thanks in advance
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi itmaint,
Try resetting the FAP-223E devices first and see if it works after that. This should be done using the reset option available physically on the device.
Thank you.
Shahan Agha
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Sagha,
I had already try the hard reset but it does not works.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The strange is that the dhcp server (Fortigate 80F) assign the IP to the 2 FAPs , but in "Managed FortiAPs" there is nothing.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi itmaint,
Do you have following enabled under the interface?
Under Administrative Access, select Security Fabric Connection.
You can also do a sniffer on FGT to check if any capwap traffic is making it to the FGT.
diag sniffer packet any 'port 5246' 4 0 a
Thank you.
Shahan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
The Security Fabric Connecion in enabled, while the diag sniffer packet any 'port 5246' 4 0 a return
: FortiGate-80F # diag sniffer packet any 'port 5246' 4 0 a
interfaces=[any]
filters=[port 5246]
^C
0 packets received by filter
0 packets dropped by kern
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
OK!!
I disabled the Secuity Fabric Connection , rebooted the FGT and reenabled the SFC and it works!!!!!!
Thanks to ALL
