Hi guys, i am a networking beginer.
i installed fortigate vm (license imported) on my esxi 7 evironment.
i enabled Muti VDOM and configured port2's interfaces like below：
port2：vdom root：Physical Interface：10.0.1.100/255.255.255.0
port2：vdom vdom-01：vlan 101 ：10.0.1.99/255.255.255.0
From window virtual machine , i can ping to 10.0.1.100.
i did configured vSwitch tag 101 but can not ping to 10.0.1.99.
Can you give me some advices ?
When you are pinging to 10.0.1.99, can you take the sniffer in firewall by executing the below commands:
diag sniffer packet any 'host 10.0.1.99 and icmp' 4 0 a
Then try to ping from the machine and kindly share us logs
Thank you for your reply !
>diag sniffer packet any 'host 10.0.1.99 and icmp' 4 0 a
i executed this command but seem like icmp packets can not be reached.
i have not set any static routing yet ,because i think it is about L2 traffic.
my goal is testing some fortigate functions privately, so only vSwitch portgroup is using.
Seems like traffic is not reahcing the firewall, it will be better if you can check in the internal network if something is blocking or re routing it to some other device
I have not configured any routing yet. I will try to route to other virtual switch instead of vmware vSwitch only !
At this time , only one vmware standard vSwitch and one portgroup being used.fortigate vm 's port2 and window virtual machine 's nic is on this portgroup.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.