Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Palamar
New Contributor

Fortigate 100a site-to-site VPN

Hello,help me please.

How to set up the VPN tunnel on fortigate 100a?

 

5 REPLIES 5
ede_pfau
Esteemed Contributor III

hi,

 

that depends on the version of FortiOS that you're using.

The procedure itself is well documented in the "FortiOS Handbook", chapter "VPN".

One advice: if possible (FOS > 4.x), use "Interface Mode" when creating phase1. Much easier to set up and debug.


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
Palamar

i use fortios v4.0,build0694

Palamar

I want to create a vpn tunnel between fortigate 100a(Firmware Version v4.0,build0694) and fortigate 80c (Firmware Version v5.2.10,build742)

 

ede_pfau
Esteemed Contributor III

On the 100A, can you check the "Interface mode" option in VPN>IPsec>Phase1?


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
Palamar

Thanks, now works.

Labels
Top Kudoed Authors