Okay, I am burning my head on this for the past few days
I have created an ipsec forticlient vpn on a fortigate 70d and is not able to connect. Error on windows pc goes like this
VPN Connection Failed. Please check your configuration, network conenction and pre-shared key, then retry your connection......
Forticlient log goes like this
3/24/2015 11:37:18 AM Notice VPN id=96566 msg="negotiation information, loc_ip=xxx.xxx.xxx.xxx loc_port=500 rem_ip=xx.xx.xx.xx rem_port=500 out_if=0 vpn_tunnel=New nav action=negotiate init=local mode=aggressive stage=1 dir=outbound status=success Initiator: sent xx.xx.xx.xx aggressive mode message #1 (OK)" vpntunnel="New nav" vpntype=ipsec
3/24/2015 11:37:18 AM Error VPN id=96567 msg="negotiation error, loc_ip=xxx.xxx.xxx.xxx loc_port=4500 rem_ip=xx.xx.xx.xx rem_port=4500 out_if=0 vpn_tunnel=New nav status=negotiate_error init=local mode=xauth_clinet stage=1 dir=inbound status=failureInitiator: parsed xx.xx.xx.xx aggressive mode message #1 " vpntunnel="New nav" vpntype=ipsec
3/24/2015 11:37:30 AM Warning VPN id=96561 msg="locip=xxx.xxx.xxx.xxx locport=4500 remip=xx.xx.xx.xx remport=4500 outif=0 vpntunnel=New nav status=negotiate_error No response from the peer, phase1 retransmit reaches maximum count..." vpntunnel="New nav" vpntype=ipsec
In Mac it goes like this,
Preshared key is incorrect
I know the preshared key is correct.This connection was working until 2 weeks back. Dont know what went wrong.
The fortigate log says " Action : negotiate Status: failureprogress Message: IPsec phase 1
Any help would be much appreciated.