Hi guys,
I configured an infrastructure with 2 FortiGate Active-Passive and 2 FortiSwitch 1024D.
The MCLAG is active and the network work. But I have a question.
In a second moment I see this document.
Is it necessary replicate the configuration of MCLAG on configuration of FortiGate?
config switch-controller managed-switch
edit "<switch-id>"
config ports
edit "<trunk name>"
set type trunk
set mode {static | lacp-passive | lacp-active}
set bundle {enable | disable}
set members "<port>,<port>"
set mclag {enable | disable}
next
end
next
Solved! Go to Solution.
No this is a configuration to create an agregate interface to connect a server or any other device using more than one cable
Orestis Nikolaidis
Network Engineer/IT Administrator
No this is a configuration to create an agregate interface to connect a server or any other device using more than one cable
Orestis Nikolaidis
Network Engineer/IT Administrator
Ahhn ok. I misanderstood the guide. Thanks
User | Count |
---|---|
983 | |
820 | |
446 | |
440 | |
131 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.