FortiLink won't come up/stay up!

[RichyRoss]

Hi All, 

FortiLink was working fine, with a FortiSwitch connected on port A of a 60f. All kit lost power, and now port A is still showing up and green but the FortiLink doesn't and is down. 

If I add port B to the FortiLink it momentarily comes back up but then drops again. 

Switch is up and working, uplink port is up and connected. I have checked NTP on the FortiLink but not sure what else to do from here pending a reboot etc?

Any thoughts?

Thanks, 

[ebilcari]

What does the output of this command show:

# execute switch-controller diagnose-connection S108EPxxxx   <-- replace with your switch serial number

[RichyRoss · Accepted solution]

apologies Emirjon I missed your reply. 

I ended up rebooting the switch and it's working now. Weird though as the Physical port was showing as up, just not the fortilink etc. 

Thanks for the reply though