Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
live89
Contributor

FortiGate 6300F diagnose debug

Hi

 

Does anyone facing the same issue I have that diagnose debug is not working with 6300F series?

 

It's working only if you connect to the specific FPC that the traffic hitting

But in order to know which FPC every time I need to run packet capture> download it> searching the appropriate pcap file then I know which FPC ...

 

Is there another way to run the diagnose debug within the MBD CLI ??

Thanks

Thanks
2 REPLIES 2
live89
Contributor

Update:

I just saw an improvements for the diag debug CLI for 6K and 7K series in the 6.0.4 version (page 6)

https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3d51d50e-6830-11e9-81a4-005056...

We're going to upgrade very soon

I hope this is gonna work as its written in the release notes

Thanks

Thanks
wdeloraine_FTNT

Hi,

diagnose debug sniffer any '<filter>' 4 0 l command will display the FPC where the traffic is handled.

 

Here's some doc related to the built in sniffer feature:

 

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Using-the-FortiOS-built-in-packet-sn...

WD
Labels
Top Kudoed Authors