- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiAP wifi performance issue
Hi Guys,
One of our company office Wifi users are facing slowness and low performance of Wifi. We are using Fortigate 100D as a controller for FortiAP's(221C). No mesh topology. in total 4-5 AP's are there. there us no difference in any AP config or firmware.
As of now I ran hrping and other ping plotter tool to see packet drop.
- in hrping I don't see any packet drop in hrping result to local gateway/firewall/ wifi controller.
- in Hrping results for internet google dns I see few packets drops randomly and high ms around 50, 200, 300, upto 500.
- In Ping plotter I see latency of avg 40 ms to local gateway/ firewall/ controller.
- In Ping plotter I see latency of avg 60ms to google dns.
what do you think about above results. Is it normal?
- what are the other possible best quick way to find out wifi performance issue or to find out any rouge AP any pointer please
thanks
A
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please check the RSSI value of the clients connected, How many clients are serviced by the AP & what is the rate at which clients are connected to AP. Is there any interference in the operating channels, If the clients are connected to 2.4G or 5G?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please check the RSSI value of the clients connected, How many clients are serviced by the AP & what is the rate at which clients are connected to AP. Is there any interference in the operating channels, If the clients are connected to 2.4G or 5G?
