Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
SaravananR
New Contributor

FMG - How to get System Template Config Interface allowcccess value in string format through API?

Under the System Template > Interface > Config Interface, we can see the allowaccess field populated with string values. (eg., fgfm, ping)

 

SaravananR_0-1694857544344.png

 

 

However, in the API response (url: pm/config/adom/{{adom}}/devprof/{{template_name}}/device/template/widget/interface/action-list), we can see total weightage of the selected allow accesses and not the individual access name (for example, allowaccess = 130, if fgfm(128) and ping(2) are selected)

Is there any API to fetch the allowaccess of individual access in string format as shown in UI?  

 

SaravananR_1-1694857544350.png

Here is the JSON of the above API output

{
"code": 0,
"data": {
"id": "1",
"result": [
{
"data": [
{
"dynamic_mapping": null,
"oid": 9975,
"var-list": null,
"seq": 1,
"action": "conf-intf",
"model": "all",
"value": {
"allowaccess": 130,
"ip": "$(sys_intf_ip_mask_wan1)",
"name": "port1"
}
},
{
"dynamic_mapping": null,
"oid": 9976,
"var-list": null,
"seq": 2,
"action": "conf-intf",
"model": "all",
"value": {
"allowaccess": 130,
"ip": "$(sys_intf_ip_mask_wan2)",
"name": "port2"
}
},
{
"dynamic_mapping": null,
"oid": 9977,
"var-list": null,
"seq": 3,
"action": "conf-intf",
"model": "all",
"value": {
"allowaccess": 183,
"ip": "$(sys_intf_ip_mask_mgmt)",
"name": "mgmt"
}
},
{
"dynamic_mapping": null,
"oid": 9978,
"var-list": null,
"seq": 4,
"action": "conf-intf",
"model": "all",
"value": {
"allowaccess": 130,
"ip": "$(sys_intf_ip_mask_lan1)",
"name": "port9"
}
}
],
"status": {
"code": 0,
"message": "OK"
},
"url": "pm/config/adom/VCPD/devprof/SYSTL_4INTF_C-C-C-C_Demo/device/template/widget/interface/action-list"
}
]
},
"errors": "",
"message": ""
}

Saravanan
Saravanan
2 REPLIES 2
AEK
SuperUser
SuperUser

I guess you have to convert it to string format with a small script.

AEK
AEK
SaravananR
New Contributor

The value written by the API is total of all the individual access's integer values.  if the individual access's integer value is returned by the API, then we can convert that individual integer value to string format.  

Saravanan
Saravanan
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors