FAZ 300 D disk log quota issue

[Baboda]

Hello,

I'd like to increment disk log quota from 1001000 to 1401000 MB but the maximum allowed amount available is 0. Actually hard disk usage is 40%. How can I set it to a higher value ?

[abelio]

Hi,

From CLI, FAZ admin guide, pag 137

execute log device disk_quota <device_id> <value>

<value> in MB

[scao_FTNT]

5.2 or 5.4 FAZ? no available space is because all space has been assigned (may not yet used) to device (5.2) or ADOM (5.4)

you can check details from "diag log device"

and you may then remove space from some device (5.2) or ADOM (5.4) to needed ones

Thanks

Simon

[Baboda]

Hello,

I've attached diag log device for 5.2 FAZ. FAZ has Fortigate A/P (800-C), FG800C3913801256 and FG800C3913801910. I've assigned disk log quota 1101000 MB each Fortigate and overwrite oldest log when allocated disk space is full. I'd like to increase it considering I have 2 T disk each in raid 1 and disk usage is 20%.

[scao_FTNT]

from pic, you assigned too much quota to each device

your 2TB x 2 RAID-1, minus OS reserved space, the max space can assign is 1690401 around 1.6TB

so you can edit each device in "Device Manager" and then change "Disk Log Quota"

Thanks

Simon