I am moving the DHCP from the windows server to the Fortigate, and the existing DHCP exclusions are more that three subnets like 6
In the GUI configuration i can add only three exclusions, can i add more using the command like when i configure the DHCP or still limited to three ?
Go to Solution.
I have tried the same in the lab for 7.0.6 version but it does not seems possible, only 3 ranges are allowed:
I get this output: edit 0Command fail. Return code -4 (reached the maximum number of entries)
On which version are you? What is the hardware?
View solution in original post
Please note that you can't configure more than 3 DHCP IP ranges on any Fortigate model or FortiOS version.
You can verify limits in the Maximum Values Table.
To be more specific i can add three ranges only but i need to add 6 ranges so can i do that from the command line or still limited to 3
@anikolov Yes its limited to 3 only regardless to the firmware or model
Thank you very much! that was really helpful
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2022 Fortinet, Inc. All Rights Reserved.