We are using FGT50E model with firmware version: v5.4.4
Currently we have a single WAN with 100Mbps speed
details: IP: xx.xx.xx.xx
Static Route has been configured for WAN1 as: AD:10 and priority:0
We will be getting a new WAN connection of 100Mbps:
I have a single LAN for my clients: 192.168.1.0/24
I want to configure it such a way that clients with IP address: 192.168.1.30-192.168.1.50 should use WAN1 as their outgoing interface and rest local IPs should use WAN2 as their outgoing interface.
I would like to know what should be the static Routes configured and how to specify the DNS address as both WAN are having a different DNS servers.
I have not done this myself. Can I ask the reason to put traffic from one set of LAN IP addresses out Wan1 and the other LAN IP addresses out Wan2? Is it for security, load balancing, or for another reason?
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.