Configure fortiswitches as active-passive

Shantilal1998 · ‎06-10-2023

Hello guys,

I have two core fortiswitches primary & secondary. Core_Primary switch is acting as gateway for endpoints.

Here, If I turn off the Core_Primary fortiswitch the traffic should send via Core_Secondary switch.

Is there anything that I can use to achieve this. Can't use VRRP as i don't have license.

ebilcari · ‎06-13-2023

If you can't use VRRP you have to move the GW configurations to another device and span the VLAN from both switches.

- Emirjon
If you have found a solution, please like and accept it to make it easily accessible for others.