Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Tutek_OLD
New Contributor

Check interface speed from CLI

Hi,

I'm looking for a command to check interface connection speed in CLI?

 

thanks

1 Solution
rdumitrescu

Try: diagnose hardware deviceinfo nic-detail <port x>

View solution in original post

5 REPLIES 5
nicerobot_FTNT

get system interface physical

---

Opinions expressed are my own and may not represent the official opinion of my employer.

Tutek_OLD

I don't have such command "physical"

fml # get system interface ? name interface name port1 port2 port3 port4

rdumitrescu

Try: diagnose hardware deviceinfo nic-detail <port x>

nicerobot_FTNT

Yes! that's it: diagnose hardware deviceinfo nic-detail port1

 

mail # diagnose hardware deviceinfo nic-detail port1

System Time:  2021-03-11 07:16:05 MST (Uptime: 0d 0h 13m)

Interface: port1

driver: vmxnet3

version: 1.4.a.0-k-NAPI

firmware-version: 

bus-info: 0000:03:00.0

 

Settings for port1:

Supported ports: [ TP ]

Supported link modes:   1000baseT/Full 

                        10000baseT/Full 

Supports auto-negotiation: No

Advertised link modes:  Not reported

Advertised pause frame use: No

Advertised auto-negotiation: No

Speed: 10000Mb/s

Duplex: Full

Port: Twisted Pair

PHYAD: 0

Transceiver: internal

Auto-negotiation: off

MDI-X: Unknown

Supports Wake-on: uag

Wake-on: d

Link detected: yes

 

Pause parameters for port1:

Cannot get device pause settings: Operation not supported

Ring parameters for port1:

Pre-set maximums:

RX: 4096

RX Mini: 2048

RX Jumbo: 4096

TX: 4096

Current hardware settings:

RX: 256

RX Mini: 128

RX Jumbo: 128

TX: 512

 

Inter-|   Receive                                                |  Transmit

 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed

 port1:  479980    2551    0    0    0     0          0         0  1589362    1324    0    0    0     0       0          0

 

mail

---

Opinions expressed are my own and may not represent the official opinion of my employer.

Bharathwaj
New Contributor

Hi all,

 

We recently starts getting the below alert from Fortinet Wi-FI 30E in our monitoring tool. Please advice.

Internal interface: full-duplex

 

internal Interface Speed changed from 1000000000 to 10000000 bps internal Interface Speed changed from 10000000 to 1000000000 bps internal Interface Speed changed from 1000000000 to 10000000 bps internal Interface Speed changed from 10000000 to 1000000000 bps

Thanks

Labels
Top Kudoed Authors