Access Intranet web server via SSL VPN

[ebeaudette]

Hi All: I have an FG100A (3.0 MR6 Patch 3) running in NAT mode and also have an SSL VPN configured for access to a file server on the " Internal" leg of our network (10.x.x.x). The VPN hands out an address in the 90.x.x.x range and all is well for remote access. I tried to setup a " Web" bookmark to our Intranet server on the 172.x.x.x leg (a DMZ port) and for some reason it is unreachable. I have the SSL config set for internal DNS on 172.x.x.x and then external on 64.x.x.x but for some reason I still get a 404 page error with the URL looking something like http://mygatewayaddress:XXXXX/proxy/http://myintranetserver (where xxxxx is my port number). I have also tried accessing it using the IP address of the Intranet server (port 80 of course). Could this be a port issue? Do I need to match the port of the web server to theVPN? Am I missing something? Thanks in advance for your help. Eric B

[jlingle]

run route print on your pc while connected to vpn. Is there a route for that 172 network? If not, you need a ssl-vpn firewall policy from wan to dmz.

[ebeaudette]

Thanks for the reply. I' ll give it a shot.