I have a Fortigate 40F setup in office with its WAN conencted to the interent on a public IP , LAN connect to office LAN network 10.61.x.x network
I and followed this guide,
Go to Solution.
In that case you need to point your default route towards interface which is connected to juniper firewall.
So the traffic will be forwarded towards juniper firewall and that firewall can provide access.Does juniper firewall connected to LAN interface of FG firewall?
View solution in original post
on vpn client the vpn sets your defaul route if you have no split tunneling on the vpn.
on Fgt it is the first one on your screnshot.
if you set that to the Juniper fw as gateway ip all internet trafic cominig fro your FGT will go to the Juniper. That'd probably be the easiest way but I am not sure if you really want that.
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
hi All, thanks all for making this work
It's all working now after adding the static route for the LAN interface with higher priority than WAN route.
It feels wonderful ! :D
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.