2 WAN IPs on the same subnet

[JLAT]

Hi, I have a fortigate 60C v5.0,build0292 (GA Patch 9). I am trying to add my second public ip to WAN 2 port in order to user port 443 on that public IP address. Port 443 is already being used in WAN 1 interface. Is there any way to do that? When I try to add the ip address to WAN 2 it doesn' t let me because it is on the same subnet as WAN 1. Thanks,

[Jeff_FTNT]

Try CLI: config sys settings set allow-subnet-overlap enable end

[JLAT]

ORIGINAL: Jeff_FTNT Try CLI: config sys settings set allow-subnet-overlap enable end

Thanks! This is what I needed.

[emnoc]

Sounds like you really need a VIP imho You could bind the #2 ip_address to the same WAN1 interface and do some DNAT. imho