Troubleshooting Tip: Tunnel interface is not visible in GUI and cannot be selected in a firewall policy or in static routes

[imathew]

Description	This article describes how to resolve an issue where the tunnel interface is not visible in the GUI and cannot be selected in a firewall policy or in static routes.
Scope	FortiGate 7.2.5.
Solution	This issue is purely cosmetic. It triggers only in an HA environment. The last configured IPsec tunnel is not visible in route or policy selection. Tunnel Named Broadband Created under port5 was not visible under interface Tunnel Named Broadband Created under port5 In the screenshot above, a tunnel named 'Broadband' created under port5 was not visible under Network -> Interface. The workaround is to create a dummy IPSec tunnel so that the previous tunnel will be visible in the GUI. A permanent fix for the issue is available in 7.2.6 and 7.4.1.