Description
This article describes that as of FortiOS firmware version 4.00 MR2, the Firewall Policy counters can be cleared from the Web Interface (GUI) by using the mouse 'right-click' button, as shown in the figure below:
Scope
FortiOS firmware version 4.00 MR2.
FortiOS firmware version 4.00 MR3.
FortiOS firmware version 5.0.x.
FortiOS firmware version 7.2.10.
FortiOS firmware version 7.4.6.
FortiOS firmware version 7.6.1.
Solution
Additional Note: On newer versions of the FortiOS, the view of the Firewall Policy and clearing the counters will be as follows:
On FortiOS v7.2.10:
On FortiOS v7.4.6:
On FortiOS v7.6.1:
Note that the Counters can be also cleared when editing the policy, as seen:
The counters will also be cleared if the firewall policy is disabled and then enabled again:
Related article:
Technical Tip : Troubleshoot and verify if traffic is hitting a Firewall Policy
