Description |
This article explains the change in speed and duplex settings on FortiGate 10G ports (x1, x2, x3, and x4) after the firmware upgrade from v7.2.5 to v7.2.6. |
Scope | FortiGate. Only 40xF and 60XF models are affected. |
Solution |
After upgrading from v7.2.5 to v7.2.6, the command 'set speed 1000auto' is no longer available in the interface settings of ports X1 - X4. This firmware update results in the port speed reverting to 10G and potentially leading to connectivity issues. The reported problem, identified by bug ID 967171, is slated for resolution on v7.2.7. It is important to note that the port speed was not intended to change during the firmware upgrade from v7.2.5GA to 7.2.6GA.
One workaround, for example, is to manually set the speed to 1000 full.
config system interface end
Related article: |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.