Created on 05-29-2008 08:53 AM
| Description | FortiGate-310B and FortiGate-620B LACP configuration |
| Components |
|
| Steps or Commands |
You can aggregate (combine) two or more physical interfaces to increase bandwidth and provide some link redundancy. The FortiGate-310B has two NP2 acceleration processors; four ports for each. When creating hardware acceleration of LACP on the FortiGate-310B, the members of the LACP must be within the same NP2 set. For example, you must select ports 1 to 4 or ports 5 to 8. Mixing ports, for example port 1 and port 5, will not function as desired. The FortiGate-620B has four NP2 acceleration processors; four ports for each. When creating hardware acceleration of LACP on the FortiGate-620B, the members of the LACP must be within the same NP2 set. For example, you must select ports 1 to 4, or 5 to 8, or 9 to 12, or 13 to 16. Mixing ports, for example port 9 and port 16, will not function as desired. See also:
and the related articles:
|
Related Articles
Technical Note / FAQ: FortiGate and FortiOS support for 802.3ad (LACP - Link Aggregation)
Technical Tip: Initial troubleshooting steps for LACP (Link Aggregation - 802.3ad)
