Troubleshooting Tip: How to filter only 'MAC-Filtering' related events in station-logs
Description
This article describes how to filter 'MAC-Filtering' related events in station-logs
Useful link.
https://docs.fortinet.com/document/wireless-controller/8.5.2/fortiwlc-configuration-guide
Scope
For version 8.4.X, 8.5.X.
Solution
SSH into the controller. Open two sessions.
Session 1: configure only MAC-filtering
Session 2: run station-log
Session 1.
Use below commands to check live mac-filtering related events.
Once exit from station-log, all settings under station-log will set back to default.
In session 2.
This article describes how to filter 'MAC-Filtering' related events in station-logs
Useful link.
https://docs.fortinet.com/document/wireless-controller/8.5.2/fortiwlc-configuration-guide
Scope
For version 8.4.X, 8.5.X.
Solution
SSH into the controller. Open two sessions.
Session 1: configure only MAC-filtering
Session 2: run station-log
Session 1.
Use below commands to check live mac-filtering related events.
Controller (15) #station-log
station-log> event id show all <----- It will show everything set to 'YES'.
Event ID FiltersNote.
===================
Enabled | ID# | Name
-------------------------------------
Yes | 1 | IP Address Discovered
Yes | 2 | DHCP
Yes | 3 | Station Assign
Yes | 4 | 802.11 State
Yes | 5 | CP User Authentication
Yes | 6 | 1X Authentication
Yes | 7 | Encryption
Yes | 8 | Mac Filtering
Yes | 9 | Diagnostics
Yes | 10 | Band Steering
Yes | 11 | SIP
Yes | 12 | Service Manager
Yes | 13 | Internal
Yes | 14 | SAE Authentication
station-log> event id remove all <----- Removing all filters.
station-log> event id show
Event ID Filters
===================
Enabled | ID# | Name
-------------------------------------
No | 1 | IP Address Discovered
No | 2 | DHCP
No | 3 | Station Assign
No | 4 | 802.11 State
No | 5 | CP User Authentication
No | 6 | 1X Authentication
No | 7 | Encryption
No | 8 | Mac Filtering
No | 9 | Diagnostics
No | 10 | Band Steering
No | 11 | SIP
No | 12 | Service Manager
No | 13 | Internal
No | 14 | SAE Authentication
station-log> event id set 8 <----- Setting filter only to 'MAC-Filtering'
station-log> event id show
Event ID Filters
===================
Enabled | ID# | Name
-------------------------------------
No | 1 | IP Address Discovered
No | 2 | DHCP
No | 3 | Station Assign
No | 4 | 802.11 State
No | 5 | CP User Authentication
No | 6 | 1X Authentication
No | 7 | Encryption
Yes | 8 | Mac Filtering
No | 9 | Diagnostics
No | 10 | Band Steering
No | 11 | SIP
No | 12 | Service Manager
No | 13 | Internal
No | 14 | SAE Authentication
station-log# en <----- Enabling.
station-log# exit
Once exit from station-log, all settings under station-log will set back to default.
In session 2.
controller(15)# station-log show all -ev 8 <----- Local mac-filtering.
controller (15)# station-log show all -ev 6 <----- Radius mac-filtering.