Meru Technical Note: Why are the AP licenses not shown on an active slave controller?
Description
Scope
Solution
Why are the AP licenses not shown on the active slave controller when the command: show license is executed?
Scope
All controllers and AP models. All firmware versions.
Solution
As per design, the license information from the master controller will not get copied/carried over to the slave controller.
The active slave will only show up the license which is imported when the controller is in standalone state (that is before starting nplus1). In such cases, the license will show even after enabling nplus1.
The active slave will only show up the license which is imported when the controller is in standalone state (that is before starting nplus1). In such cases, the license will show even after enabling nplus1.