Meru Technical Note - Two controller showing same BSSID leading to Vocera configuration issue.
Two controllers showing same BSSID leading to Vocera configuration issue
BSSIDs are same on both the controllers which is causing issues to add BSSID for vocera configuration on the vocera server.
Unique BSSIDs needs to be set on the Vocera server, but when accessing both controllers there were few BSSIDs which are the same. The settings that were used are non-vcell setup. Most of the BSSIDs were unique but few were same on both controllers
Scope
KB ARTICLE TYPE: Troubleshooting
RELATED PRODUCTS: controller
RELATED SOFTWARE VERSIONS: 5.x,6.x,6.x
KEYWORDS: Vocera, BSSID, Controller
Solution
Step 1: Verify if BSSID’s are same on both the controllers.
Step 2:.Verify if the controller index are different on both the controllers.
Step3: Change the Controller index from 0 to 1 on one of the controller which will change the BSSID on the controller.
Step4: Reboot the controller on which the controller index was changed.
RESOLUTION:
Changed the controller index from 0 to 1 (made sure that both the controller index are different).
ROOT CAUSE:
The controller index were the same on both the controllers (which is “0”). As per the BSSID generation mechanism we can see few BSSIDs on both the controllers the same. In same network if there are two controllers in same place the best practice is to have different controller index.
