Meru Technical Note - How to configure a NTP server on the controller?

How to configure a NTP server on the controller?

KB Article Type: Configuration

Related Products: All Controller Models

Related Software Versions: All code version

Keywords: Commands to enable time synchronization with an NTP server

Step 1 : Type "ntp sync"

Step 2 : Type "ntp server x.x.x.x" where x.x.x.x is the IP address of the NTP server.

Step 3 : Type "reload controller"

Step 4 : Type "show ntp-server" to validate the set ntp server.

LIMITATIONS: A reboot is required for the changes to be implemented.