Meru Technical Note - How to check what controller an AP is connected to

Description

How to check which controller an AP is connected to.

Scope
KB ARTICLE TYPE: Troubleshooting
RELATED PRODUCTS: All AP's
RELATED SOFTWARE VERSIONS: 4.0 and greater
KEYWORDS: AP, IP address, Controller, CLI, cinfo, show
Solution
From the controller's CLI, connect to the AP and run the following command without the quotes:

"cinfo show"

Example:

Controller# connect ap 5
ap 35>cinfo show

Controller Info
===============
Index 5
ID 5
Virtual IP    172.2.2.16
subscription 0; subscriber 0x100b0118