System is starting... usb.c: unable to get device descriptor (error=-110) Starting system maintenance... Scanning /dev/sda1... (100%) Formatting shared data partition ... done! usb.c: unable to get device descriptor (error=-110) usb.c: unable to get device descriptor (error=-110) usb.c: unable to get device descriptor (error=-110) FWF60CXXXXXXXXXX login: usb.c: unable to get device descriptor (error=-110) usb.c: unable to get device descriptor (error=-110) usb.c: unable to get device descriptor (error=-110) usb.c: unable to get device descriptor (error=-110) usb.c: unable to get device descriptor (error=-110) usb.c: USB device not responding, giving up (error=-110) FWF60CXXXXXXXXXX login: FWF60CXXXXXXXXXX login: FWF60CXXXXXXXXXX login: admin Password: Welcome ! FWF60CXXXXXXXXXX # diagnose sys flash list Partition Image TotalSize(KB) Used(KB) Use% Active 1 FWF60C-5.02-FW-build760-171025 38792 31044 80% Yes 3 ETDB-1.00000 38796 8688 22% No Image build at Oct 25 2017 20:41:50 for b0760 FWF60CXXXXXXXXXX # get hardware status Model name: FortiWiFi-60C ASIC version: CP0 ASIC SRAM: 64M CPU: FortiSOC Number of CPUs: 1 RAM: 436 MB Compact Flash: 14962 MB /dev/sda Hard disk: not available USB Flash: not available WiFi Chipset: Atheros AR5416 WiFi firmware version: 0.9.17.1 FWF60CXXXXXXXXXX # fnsysctl /proc/partitions invalid command Command fail. Return code -61 FWF60CXXXXXXXXXX # fnsysctl cat /proc/partitions major minor #blocks name 8 0 15261696 sda 8 1 40064 sda1 8 2 40064 sda2 8 3 40064 sda3 FWF60CXXXXXXXXXX # diagnose hardware deviceinfo disk Disk Internal(boot) ref: 14.6GB type: USB [JetFlash Transcend 16GB] dev: /dev/sda partition ref: 37.0MB, 7.0MB free mounted: Y label: dev: /dev/sda1(boot) start: 256 partition ref: 39.0MB, 39.0MB free mounted: N label: dev: /dev/sda2(boot) start: 80384 partition ref: 3 37.0MB, 29.0MB free mounted: Y label: dev: /dev/sda3 start: 160512 Total available disks: 1 Max SSD disks: 0 Available storage disks: 0 FWF60CXXXXXXXXXX #