Hi,trying to find out what's going wrong concerning typical 1x Hub - 2x
Spoke setup with internal BGP.First setup is the setup with IBGP. This
works fine, the spokes can communicate with the hub. Below is the design
and the relevant info. The Hub is ...
Hi, having a strange issue on a basic setup... Basic setupsite HQ:
Fortigate 100F R7.4.1. Internal IP 192.168.17.252/24site X: Fortigate
60F R7.4.1. Internal IP 10.254.28.1/24site Y,Z, ...: Fortigate 60F
R7.4.1. Other subnets (so, no overlaps) site H...
Hi, thank you for the feedback and the time you took to check this... I
think the exchange-interface-ip is needed so the IPsec can come online
and the BGP loopback addresses can communicate with each other for the
ibgp peering... But, after this post...
For SiteX, the only policy routes are the SDWAN rules. the output is
below.The relevant line is id=2131361796, with 10.212.130.0 - .255 as
destinationAuxiliary-session is disabled (but tried with enabling it
before) TUBRAVFW01 # get firewall proute l...
