Hello, I have a forti60f, fortios 7.0.16 build 0667, since I updated the
firmware every time it wants to update the fortiguard bases it
crash,Sometimes in the logs I saw this messages-Kernel enters memory
conserve mode.-The system has activated sessi...
Hello: I have a Fortinet 60F, I changed the wan1 connection to Starlink,
addressing mode dhcp and static route with dhcp too. If I enable wan1,
the PCs can have internet with Starlink and with the other connection
but the VPN drops, I have to disable...
Good morning: I have a policy that blocks social networks, I block them
in web filter and application control but I have to except
developers.facebook. com but I couldn't do it. I excepted it in deep
inspection and in web filter I put that address to...
hello, Reviewing the forti logs, I see traffic from the last 7 days from
an IP whose domain is example.com, but 2 days later, reviewing the logs
from the last 7 days, the same IP again, now the domain became
otrodominiodiferente.com, even the Logs fr...
Thanks for responding. Yes, the update is done at 1 am when no one is
there. I attach the requested log. Greetings FGT60F-LTS# diag debug
crashlog read1: 2024-09-05 01:22:18 MemFree: 12800 kB2: 2024-09-05
01:22:19 Buffers: 196 kB3: 2024-09-05 01:22:1...
Toshi, Yes, I did that, it seems to work now.get router info
routing-table allCodes: K - kernel, C - connected, S - static, R - RIP,
B - BGPO - OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2
- OSPF NSSA external type 2E1 - OSPF external...
Toshi, I am attaching screenshots of how the static routes are.If I
understand correctly, the only thing I have to change is the distance on
the interface from wan1 to 10?
