I have two switches that I'm starting with. - HP Switch 1 has good
link/activity lights. I can ping it and devices connected to it. - HP
Switch 2 has good link/activity lights. I can not ping it or devices
connected to it I went line by line in the c...
I created my first VLAN Interface on the Fortigate, under the LAN port
that goes to our core switch. The LAN port to the HP Switch is a Trunk
port and the new VLAN is permitted on the trunk port. For now all the
other VLAN interfaces are on the Layer...
Currently our Fortigate is connected to an Access Port on our Core
Switch tagged with VLAN 4000. The Core Switch has all our Virtual
Interferfaces configured on it with no restrictions on what VLANs can
see/access other VLANs. The core switch has a s...
Thank you for the reply. I think putting FortLink in the subject may
have made things confusing. FortiLink connects the FortiSwicth to my
FortiGate for management purposes. The issue I'm having has to do with
one out of two HP switches not passing tr...
@Toshi_Esumi - Yes, it's me again/still. Adding the Native VLAN 4000 to
the trunk port 4/0/23 fixed my first issue, now I've moved on and I am
stuck again. I believe the issue is on the switch side. From the switch
console I can ping the VLAN 210 Int...
Sorry for the confusionI created the VLAN Interface on the FG using the
IP Address 10.1.210.1 From the Core switch console I can ping the VLAN
interface that exists on FG but I'm unable to ping any resources on the
10.1.210.0 subnet. Also, none of th...