Hello, I have follow this tutorial
https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-with-overlapping-subnets/ta-p/189886
because my remote site and VPN site has same subnet (192.168.1.0/24)
However VPN is working perfectly except the...
I think I have found the solution, but I'm not sure if it's best
practice.Since the NAT IP isn't the real WAN IP as it is supposed to be,
I forced the LAN to WAN policy to NAT by IP Pool with the WAN IP that I
got from an ISP.(manually create) But I ...
According to the picture it was the LAN to WAN policy that I created
before implement VPN which is used to work normally before and when I
disable the VPN policies the log from LAN to WAN policy works fine.Here
is more detail from log:ps. the NAT ip ...
When I disable the policy the VPN network is OK Here is the policy that
created by the tutorial and this is a LAN to WAN policy which is normal
policy to allow the internet access
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
