Description This article describes how to enable QSFP28 port splitting
on FortiGate to create four 25G subports (e.g., port17.1 to port17.4)
and use them in two separate LAGs (LAG1 to SW1, LAG2 to SW2) using
QSFP28-to-4×SFP28 passive DAC breakout cab...
Description The article illustrates a dual-hub ADVPN topology. The key
feature being demonstrated is that multiple independent shortcut tunnels
can exist between the same pair of spokes. Scope FortiGate, ADVPN.
Solution ADVPN implementation allows mu...
Description This article explains the forwarding decisions using the ARP
table and FDB in Transparent mode. Scope FortiGate v6.0+. Solution In
transparent mode, the Address Resolution Protocol (ARP) table is used in
the following situations: For IP t...
Description Trunk VLAN forwarding logic handling unknown VLANs in
transparent mode. Scope FortiGate 6.0+. Solution VLAN forwarding:VLAN
forwarding allows forwarding all the VLAN traffic of a trunk that was
connecting two network devices, as well as w...
Description This article describes recommended use of the
'allow-push-configuration' command. Scope FortiGate. Solution The
command 'allow-push-configuration' under 'config system
central-management' is used to add control for admin-scp. CLI: config
...