Hi all, please does anyone have had issues when trying to use the FMG
Revisions config files (FMG 6.4 or 7.0) in order to recovery a device
(RMA for example)? I have simulated a recovery process (assuming FMG is
not accessible - isolated location) in...
Hi, please does anyone knows if it is possible and how to create local
(flash) Config Snapshots (like Cisco Archive - local config based on
"wr" command or etc) in order to have safe points to be used when config
push errors/mistakes? we have several...
Dear Community, I need to decommission a FortiGate Cluster from
FortiManager and before that, I would like to explore the recovery
process when deleting it from Device Manager panel and the Policy
Package. 1. is there any feature to backup/export all...
Hi Community, I am looking for deep info about the relation between
FortiManager discovery process & FortiGate local credentials after the
discovery process. During the discovery process (onboarding new FGT) we
use the local super user „123test“ and ...
Hi Community, We have 2 IPsec Tunnels (Tunnel 10 and Tunnel 20) between
Fortigates (Remote and Concentrator) with only 1 Phase 2 Selector
configured and auto-negotiate disabled. Both tunnels are working as
expected where we have connectivity from bot...
Hi @Toshi_Esumi tks for the update here, please did you push it from FMG
right? I am simulating here a push of the Revision downloaded from FMG
via CLI & USB to the new device (locally) assuming cases where FMG is
not reachable (remote locations conn...
Hi @asrour, tks for the input here!FGT revision is a good idea but how
about the rebuild process? It forces us to install a new FGT cluster,
including reachability, push the backup revision and then perform a new
scan and import the Policies into a n...
Hi @smkml , Thanks for the input here but the question here are the
actions that can be done before delete the device in Device Manager
Panel and also before delete the Policy Package and have a fast recovery
point for Device Manager settings and Pol...
Hi Suraj,I have found the info from your statement some slides later as
attached here.Yeah, the credentials are used during the „add process“
and then the Serial Number is used to establish and authenticate the
FGFM tunnel.Tks for the colab!
H Suraj, thanks for the input, please do we have any documentation oder
KB regarding your statement? Attached is what I have found from FMG v7.2
Self Paced Training that clear says it is used also for „install
configuration“ but which cases?
