I need to create several IPsec tunnels, all remote sites with the same
network (192.168.0.0/24). It is not possible to do any NAT (or any other
config) at remote site. I would separate the sites by- site 1
192.168.71.0/24- site 2 192.168.72.0/24 My t...
I would like to specify my initial question. The goal is to establish
multiple VPN-s with overlapping customer-side addresses. It is not
possible to either NAT or change the address at customer’s end.In that
case, I can't see any possibility that the...
