Hi all, i have stubborn customer insisting on Rustdesk as a support tool
for desktop support.Advising him of migration to Anydesk or something
similar didnt helped.So, question:FG80f configured to allow necessary
ports (21114-21119) are configured, n...
Hi all,our current setup is FG 80f acting as a firewall and NAT device
with Layer3 switch acting as a router for office network and intervlan
routing.We would like to replace current layer3 switch with 2 switches
from Forti ecosystem that can act as ...
Hi all,In scenario with two location connected via ipsec tunnel, remote
office is accessing internet through wan port in main office, is it
possible to capture and send traffic, remote office - internet and vice
versa traffic, to analysis sensor?Some...
I will close this issue because there might be a problem further
upstream, at ISP side.Client is advised to move onto commercial
sollution like Anydesk or Teamviewer.Thank you allbr,Drazen
Hi and sory for late answer, i was on free days....Yes, im aware of
that, but since these switches are first to have that feature there is
no other option. I do believe that after some time replacing FG with
stronger model is not going to be problema...
Hi Aek, so....Good thing is that interVLAN traffic no more needs to pass
through FG, but bad news is that i must pay extra for that and also bad
VRRP and rest of L3 goodies is available only in standalone mode.So, my
setup could/would like this:1FG 8...
