Troubleshooting Tip: Possible Reasons and resoluti...

shahrukh_khan · 12-21-2025

Description This article describes the use case of Bidirectional Forwarding Detection (BFD) with a static route. Scope FortiGate. Solution Bidirectional Forwarding Detection (BFD) is designed to detect failures in the bidirectional path between two f...

shahrukh_khan · 12-16-2025

Description This article describes Mapping Member Priorities to MED in Hub-and-Spoke Topologies. Scope FortiOS Version: 7.6.1 and later. Solution In FortiGate SD-WAN deployments, integrating Border Gateway Protocol (BGP) allows dynamic route advertis...

shahrukh_khan · 12-15-2025

Description This article describes the process of configuring Bidirectional Forwarding Detection (BFD) with BGP. Scope FortiOS. Solution Bidirectional Forwarding Detection (BFD) is a lightweight, low-overhead protocol that provides rapid detection of...

shahrukh_khan · 09-25-2025

Description This article describes the use case of the 'set next-hop-self-rr enable' command in BGP. Scope FortiGate. Solution To address the unexpected next-hop behavior, the hub can be forced to rewrite the next-hops for reflected routes using 'set...

shahrukh_khan · 09-24-2025

Description This article describes that in FortiGate Auto-Discovery VPN (ADVPN) setups using BGP, an 'unexpected' next-hop behavior can be observed where the next-hop IP in received routes does not match the advertising neighbor (typically the hub). ...

User Statistics

User Activity

Technical Tip: Bidirectional Forwarding Detection (BFD) with static routes

Technical Tip: BGP MED's Impact on SD-WAN

Technical Tip: Bidirectional Forwarding Detection (BFD) with BGP

Technical Tip: Explanation of 'set next-hop-self-rr enable'

Technical Tip: Understanding unexpected Next-Hop behavior in FortiGate ADVPN with BGP

Troubleshooting Tip: Possible Reasons and resoluti...

Technical Tip: Packet drop with error log 'replay ...

KCS

User Statistics

User Activity

You are leaving our website